Activate Trackting SMART V3

Activating Trackting SMART V3 only takes a few minutes. Installation is quick and easy

Discover your SMART

Inside the box, you will find:

  • Black GPS tracker
  • Red keychain tag with a battery inside, already paired with the tracker
  • Card with QR Code
  • USB-C charging cable
  • Double-sided adhesive and zip ties for mounting

———

Please note

Warning: This activation procedure refers to the new Trackting SMART V3 model.
If you have purchased the previous model, activate it from here.

  • 01

    Install the "TRACKTING" App

    Register and follow the instructions in the App.

  • 02

    Recharge the tracker

    Connect the Tracker (black device) to a charger using the supplied USB-C cable.

    The Tracker's LED will start flashing red. Wait until it turns solid green: charging complete.

    ———

    Good to know

    The Tag (red keychain) in the package already has a battery inside and is already paired with your Tracker: you don't need to do anything.

  • 03

    Pair the tracker

    Open the App, click on Add Device (the + button at the top), authorise the App to use the camera, and scan the QR Code on the card inside the package.

  • 04

    Perform the initial localization

    • Take the Tracker and Tag to an outdoor location with a clear view of the sky.
    • Shake the Tracker for 5 seconds, then place it on a flat surface.
    • Now move at least 30 meters away with the Tag.
    • Within 5 minutes, you will receive a notification on the App where you can see the location on the map.

    Great! You have completed the first location!

    Don't see the location on the map? Repeat the procedure or contact Customer Support.

  • 05

    Place the tracker on your vehicle

    Hide the Tracker in your vehicle and remember to always carry the Tag with you.

    Some useful tips:

    • For optimal GPS signal reception, the Tracker label must face downwards.
    • NEVER leave the device connected to the charger: in this state, the device will not trigger an alarm.
    • Never hide it inside closed metal compartments that can shield the signal.
    • In a car: avoid placing it in the doors because they can vibrate, generating false alarms.
    • On a motorcycle or scooter: if you place it in the under-seat compartment, to avoid vibrations, you must secure it with the provided double-sided adhesive.
    • From the App, you can adjust the vibration sensitivity for the Tracker's accelerometer.

    NOTES:

    The Tracker can be secured using the automotive double-sided adhesive provided in the package.

    • For optimal hold, install the device on clean, dry surfaces not exposed to direct heat.
    • It is recommended not to install the device in areas subject to high temperatures, such as near mufflers, engines, or parts that generate intense heat. Prolonged high temperatures can reduce the effectiveness of the double-sided adhesive over time.
    • periodically check the condition of the adhesive and, if necessary, replace it with an equivalent tape.

  • 06

    Learn how it works to get the most out of it!

    Trackting SMART is a complete and intelligent system: to fully understand it and get the most out of it, we recommend reading this simple guide.

    New! You can adjust the vibration sensitivity

    Adjust the sensitivity according to the type of vehicle and your needs.
    Remember: a sensitivity that is too high could trigger the alarm in the event of external vibrations (such as passing trucks).

Choose the right coverage for you

Three versions based on SIM coverage. No monthly fees, forever.